-
The Support plates ensure that the wooden plate is not dented by the wheels of the Carrier when it is loaded onto the veicle interface. For installation we advise you to watch the assembly film of the vehicle interface before starting assembly. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.Application
This plate is for the vehicle interface L46.Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
864 x 1185 x 15 mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.Application
This plate is for vehicle interface L46.Dimensions
794 x 1185 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
The Safety activator is part of the chassis. The Safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox XL36. Note: the performance of the legs must be reset when these parts are replaced. See manual.Applications
Dynnox XL36 -
The complete XL36 is composed of the chassis L46 + the car interface + the wooden plate L46. With this you have everything you need for the Dynnox XL36. The mobile Dynnox transport system is available in three dimensions and can be used in all types of company vans. The XL36 is our narrowest model. The Dynnox XL36 forms the basis for every narrow mobile transport system in company vehicles. The undercarriage weighs only 80 kg and has a bearing capacity of no less than 250 kg! You can select one of our proven applications or design an installation module that perfectly matches your situation; the smart system keeps everything light and easily moveable. For this model a detachable auto interface is available. This allows flexible deployability of the Dynnox. This way you can use the Dynnox for project-based work, easily smooth out the load floor or take out the Dynnox in case of an exchange of company vehicles. Read more about the XL36 or contact us!Dimensions
The Dynnox XL36 has a frame width of 360 mm. The detachable auto interface is structured around a wooden plate of at least 12 mm thickness. From 16 cm above the frame the installation module could be up to 20 cm wider. -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL36 -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.Application
This plate is for vehicle interface X36.Dimensions
694 x 1470 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
The safety activator is part of the chassis. The safety activator is the most important part of Dynnox. When loading an undercarriage in a vehicle, the unlocking of the legs is hereby ensured. But also the locking of the legs when unloading a chassis. This part is for the Dynnox XL53. Note: the performance of the legs must be reset when these parts are replaced. See manual.Applications
Dynnox XL53 -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL36 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.Application:
Dynnox XL36 -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL53 Vehicle interface XL46 in combination with pneumatic tire option -
The loading tray is the platform on which the frame comes first. The sloping side of the platform ensures that the frame is lifted from the ground. The loading wheel should be halfway along the slope of the loading tray. At the front of the loading tray is also a small “platform” with a hook on it. This activates the mechanism and unlocks the legs. It is therefore important that the chassis is never higher than the loading tray.Application
Vehicle interface XL53 in combination with pneumatic tire option -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the car plate a kind of puzzle.Application
This plate is for the vehicle interface XL53Option
When the option of pneumatic tires is chosen, the wooden plate becomes 7 cm wider but not longer.Dimensions
934 x 1470 x 15mmSafety
The positioning of the parts must be very accurate due to the positioning and locking of the chassis on the vehicle interface. -
The positioning of all parts is pre-drilled and milled on both sides of the wooden plate. This makes mounting the parts of the vehicle interface on the vehicle plate a kind of puzzle.
Application
This plate is for vehicle interface XL53Dimensions
864 x 1470 x 15mmSafety
The positioning of the parts must be totally accurate due to the positioning and locking of the chassis on the vehicle interface. -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier L46 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism. See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle. -
The chassis L46 is the shortest Dynnox. The car interface is not included. The front is 10cm shorter than the back due to the adjustment of the legs when the chassis is loaded. Due to its length in combination with its maneuverability, it is often used indoors. An application of approx. 60 cm width, 120 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application Read more about the L46 or contact us! -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier L46 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism. See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle. -
The chassis L46 is the shortest Dynnox. The car interface is not included. The front is 10cm shorter than the back due to the adjustment of the legs when the chassis is loaded. Due to its length in combination with its maneuverability, it is often used indoors. An application of approx. 60 cm width, 120 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application Read more about the L46 or contact us! -
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us! -
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us! -
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us! -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier L46 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism. See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.
-
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL36 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle. -
The complete XL53 is composed of the chassis L46 + the car interface + the wooden plate L46. With this you have everything you need for the Dynnox XL53. The mobile Dynnox transport system is available in three dimensions and can be used in all types of company vans. The XL53 is our largest model. The Dynnox XL53 forms the basis for every narrow mobile transport system in company vehicles. The undercarriage weighs only 80 kg and has a bearing capacity of no less than 250 kg! You can select one of our proven applications or design an installation module that perfectly matches your situation; the smart system keeps everything light and easily moveable. -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL36 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.
-
The complete XL36 is composed of the chassis L46 + the car interface + the wooden plate L46. With this you have everything you need for the Dynnox XL36. The mobile Dynnox transport system is available in three dimensions and can be used in all types of company vans. The XL36 is our narrowest model. The Dynnox XL36 forms the basis for every narrow mobile transport system in company vehicles. The undercarriage weighs only 80 kg and has a bearing capacity of no less than 250 kg! You can select one of our proven applications or design an installation module that perfectly matches your situation; the smart system keeps everything light and easily moveable. For this model a detachable auto interface is available. This allows flexible deployability of the Dynnox. This way you can use the Dynnox for project-based work, easily smooth out the load floor or take out the Dynnox in case of an exchange of company vehicles. Read more about the XL36 or contact us!Dimensions
The Dynnox XL36 has a frame width of 360 mm. The detachable auto interface is structured around a wooden plate of at least 12 mm thickness. From 16 cm above the frame the installation module could be up to 20 cm wider. -
The chassis XL53 is the longest and widest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used for bulky and / or complicated applications. An application of approx. 80 cm width, 140 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application. Read more about the XL53 or contact us!
-
The chassis XL53 is the longest and widest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used for bulky and / or complicated applications. An application of approx. 80 cm width, 140 length and 120 hight can be mounted on the frame, providing that the mass (load) is well distributed in the application. Read more about the XL53 or contact us! -
The XL36 chassis is the longest and the thinnest Dynnox. The front and back are the same width. The car interface is not included. Due to its length and width, it is often used when enough space in the car is also important. An application of approx. 50 cm wide, 140 long and 120 high can be mounted on the frame, provided that the mass (load) is well distributed in the application. Read more about the XL36 or contact us! -
The complete XL53 is composed of the chassis L46 + the car interface + the wooden plate L46. With this you have everything you need for the Dynnox XL53. The mobile Dynnox transport system is available in three dimensions and can be used in all types of company vans. The XL53 is our largest model. The Dynnox XL53 forms the basis for every narrow mobile transport system in company vehicles. The undercarriage weighs only 80 kg and has a bearing capacity of no less than 250 kg! You can select one of our proven applications or design an installation module that perfectly matches your situation; the smart system keeps everything light and easily moveable. For this model a detachable auto interface is available. This allows flexible deployability of the Dynnox. This way you can use the Dynnox for project-based work, easily smooth out the load floor or take out the Dynnox in case of an exchange of company vehicles. Read more about the XL53 or contact us! -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL53 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle. -
The vehicle interface is made of three core parts: the loading platform, the loading tray and the wooden plate. The Carrier XL53 is not included. The vehicle interface has three essential functions: A) due to the loading tray it unlocks the mechanism . See art. loading tray B) it guides the chassis in the vehicle. C) it locks the chassis in the vehicle.
